All stock Parkway jars & caps are manufactured to meet average industry standards. These standards will not be suitable for all customer applications. Also minor variations in perceived quality occur between jars & caps of different sizes due to the fact that all of our molds are not of the same age, style or condition. For this reason, we request that the customer test enough samples of our jars & caps so as to decide whether or not our jars are suitable for the customer's intended application.

Samples: Will only be accepted for processed via fax, US mail or Parkway’s website located at www.parkwayjars.com. Samples will be acknowledged via fax or email.

Orders: Will only be accepted, processed and acknowledged via fax or mail. All prices are based on our standard materials, scheduling, packaging, and PPI QC Procedures. Special colors, materials, scheduling, packaging, inspection, QC Requirements are available by quotation.

Terms: Net 30 to approved accounts and must be in US Funds. FOB Factory.

Payment: We also accept Cash, VISA & MasterCard credit card and wire transfer. Personal or Company check will take 14 days to clear processing of bank.

Pallets: Parkway's products do not include pallets. Parkway recommends that styrene jars, custom orders and printed items be shipped on pallets. Pallets with shrink-wrap cost $ 7.50 per pallet.

Shipping: All items are shipped FOB Factory.

Shipping Allowance: Freight allowance on Stock Jars and Caps: 5% when shipped west of the Mississippi river and 15% when shipped into California. Some restrictions apply. No freight allowance on Specialty items, custom molded, decorating or secondary operation.

Shipping Specifications: All current shipping specifications such as freight classifications, carton density, cubic ft, weight, piece count, and other packaging and/or shipment information is available on our website http://www.parkwayjars.com/pdfs/specif.pdf.

Freight Handling Charges: All UPS and Prepaid Freight (direct or third party billing redirected to Parkway) are increased by 10% to cover handling.

Damage in Transit: Once the items leave our shipping dock you are responsible for placing damage freight claims to your delivering freight carrier within 7 days, unless you have other terms set up.

Damage: All claims must be made to Parkway Plastics Inc within 5 days after receipt of goods.

Returns: Prior Authorization is required for all returns and is assigned an RGA Number. Items without a valid RGA number will be refused. Not all items may be returnable.

Jar Volumes are for Polystyrene. Polypropylene volumes are approximately 5% less.

Jar Thread Finish: Our standard thread finish is CT-400 made to G.C.M.I specifications for all jars except 3oz 58mm ThickWall and RegularWall These are made to SPI specifications.

Cap Thread Finish: Parkway Plastics cap thread finish is manufactured to SPI specifications.
Cap liner: All lined caps are lined with our selection of TRISEAL F217 or equivalent liner material. Specialty liners are quoted separately.

Cap Information: Ribbed caps have matte tops. 43mm ribbed caps have smooth tops or matte tops. Please specify. Dome cap liners are not glued in, but press fit only. It is not unusual for press fit liners to fall out of the cap during storage or transport, and therefore PPI does not consider this a defect and will assume no responsibility for this.

Custom Caps: Custom colors, special lining or secondary processes is available on a quotation basis. Parkway Plastics Inc will not be responsible for the scuffing or marring of caps. Scuffmarks are more noticeable on black or dark color caps and are not returnable.

Custom Services: All stock Parkway jars are manufactured to meet average industry standards.
These standards will not be suitable for all customer applications. Also minor variations in perceived quality occur between jars of different sizes due to the fact that all of our molds are not of the same age, style or condition. For this reason, we request that the customer test enough samples of our jars so as to decide whether or not our jars are suitable for the customer's intended application. If you find that our standard jar is not suitable for your application, we will be happy to review your needs and quote any special services that may be needed to meet your QC requirements.

Decorating Minimum Runs: Minimum runs for flame treating, frosting and printing are 10,000 pieces for items under 48mm and 5,000 pieces for items over 53mm. Pricing for less than minimum run is by quotation only.

Flame Treating: All Items Printed by PPI are flame treated where necessary. Items not printed by PPI may be flame treated at $30.00/m per side for sizes up to 58mm, $35.00/m per side for 63mm to 89mm, $45.00/m per side for 100mm to 120mm. Flame Treating is a temporary process. Jars should be labeled or printed on as soon as possible.

Printing Prices: Printing prices are based on average PPI requirements and approval of final artwork and printing specifications. Minimum printing gap of 1/2" required based on artwork fitting on jar. For custom items or special inks add 10% to the standard printing prices. We reserve the right to over/under ship by 10% Orders for exact quantities add 5% to the total price of the order.

Artwork Charges: Parkway expects to work from camera-ready artwork. Art Adjustment charges are quoted and billed separately.

Offset Printing: Plate charges are $150.00 per plate. Some jobs may require more than one plate per color. Plate charges do not include artwork or prep charges, which are quoted and billed separately. Imprint or color changes are $75.00 per change.

Silkscreen Printing: Silkscreen charges are $50.00 per print job. Screen charges do not include artwork adjustment charges or preparation charges, which are quoted and billed separately.

Printing Pre-production Run: All printed orders are run according to our interpretation of commercial acceptability as regards color matching, ink lay down, and artwork position on the container. Customers who wish their job run according to their standards must request a pre-production run sample at a cost of $375.00 per sample run.

PPI CERTIFY THAT THESE GOODS WERE PRODUCED IN COMPLIANCE WITH THE FAIR LABOR STANDARDS ACT AS AMENDED AND WITH THE EQUAL OPPORTUNITIES ACT.
Parkway Plastics Inc. manufactures in accordance with GOOD MANUFACTURING procedures.

Warranty Information
Stringent product requirements normally require premium priced materials, and or premium priced manufacturing services, for satisfactory product and package performance. For this reason, we make no warranties, expressed or implied, as to the performance of our products with any specific product, or its suitability for any specific use. We will however, be happy to supply the customer and/or end user, with any and all samples, at nominal charges, that may be required by the customer and or end user may judge the degree of product compatibility, suitability of use, and overall package / application performance

Parkway Plastics is closed for preventative maintenance during the first two weeks of July
Not responsible for typographical errors!